Disclaimer and Safety Notes

The guides here are general information. They do not replace your product's manual, the manufacturer or a qualified technician.

General information only

Fault Code Fix explains what error codes and warning lights commonly mean and suggests safe first checks. Codes can mean different things on different models and software versions, and the same symptom can have several causes. An entry here can be wrong for your exact product, so always compare it with your own manual and the manufacturer's support pages. Use of this site is at your own risk.

If you smell gas

If you smell gas near a furnace, water heater, range, oven or dryer, do not turn any switch or appliance on or off, do not use a phone or flame inside, and do not try to find the leak. Leave the building, and from outside call your gas utility's emergency number or emergency services. No code entry on this site is a reason to stay inside and troubleshoot a suspected gas leak.

Electricity and high voltage

Unplug an appliance or switch off its breaker before opening any panel. A microwave oven can hold a dangerous electrical charge in its high-voltage capacitor even when unplugged, so do not open the cabinet. Water and electricity are a dangerous combination, so never work on a wet appliance or with wet hands. If you are not trained, leave internal electrical work to a licensed technician.

Refrigerant and sealed systems

Air conditioners, mini-splits, heat pumps and refrigerators contain refrigerant under pressure. Do not open or puncture a refrigerant circuit. In the United States, handling refrigerant legally requires technician certification. Faults that point to the sealed system, such as a loss of cooling with no other cause, need a licensed technician.

Water heaters, boilers and furnaces

Gas and oil appliances can cause fires, carbon monoxide poisoning and explosions if repaired wrongly. Keep working carbon monoxide alarms on every level of your home. A water heater that is too hot, leaking, making unusual noises or showing a safety code should be switched off at the gas valve or breaker and inspected by a professional. Do not bypass safety devices such as high-limit switches, flame sensors or pressure relief valves.

Cars and warning lights

A warning light can mean a minor fault or a serious one. Where an entry says to stop, pull over safely and have the vehicle checked. Brake, oil pressure, overheating, steering and airbag warnings should not be ignored. Never open a hot radiator cap. A code reader gives you a code, but it does not diagnose the cause, and replacing the part named by a code does not always fix the fault.

Game consoles and electronics

Do not open a console power supply, which can hold a charge. Contacting the manufacturer's support is usually the right step when a code points to hardware. Back up your data before attempting resets or system restores that may erase it.

Codes with no specific fix

Where a manufacturer lists a code but does not publish a cause or repair, the entry says so. The checks shown for those codes are the general steps the manufacturer advises, such as a power reset, and they may not fix the fault. If the code returns, the appliance needs diagnosis by a technician.

Accuracy and links

We check entries against manufacturer and independent sources, show when each was last verified and correct them when errors are reported, but we cannot guarantee that every entry is complete or current. Links to other websites are provided for convenience, and we are not responsible for their content. To report an error, use the Report an Issue form. Fault Code Fix is independent and is not affiliated with any manufacturer.